Tag - hitachi tv repair

19 Feb

CE Tech Tips — February 2021

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 53SDX01B
Reason for Service: When set turns on, screen is black except for OSD.  Channels changing constantly if you can see them.
Solution: Replaced defective DM04 on control board.

LG TV, 47LE5400
Reason for Service: Set won’t start past LG Splash logo. No buttons work.
Solution: Removed large plastic heatsink and then reflowed large IC on main board.

RCA TV, HD50LPW175
Reason for Service: FPD lights up, then blinks five times, and nothing further happens.
Solution: Check all following caps in power supply: C624, C639, C641, C647 and C640.

Samsung TV, LNT3242HX/XAA
Reason for Service: Dead set, has 5V standby.
Solution: Replaced RM801 in power supply.  0.22W/1W

Samsung TV, LN46A550P3F
Reason for Service: Set makes screeching noise then shuts off.
Solution: Replaced C102, SM 47uF/6.3V Blue box cap.

Sony TV, KDL32L504
Reason for Service: Dead set.
Solution: Found bad IC6102 bad; replaced with Sony 670880101.

Viore TV, LC37VF55
Reason for Service: Set had bad picture, almost like solarized.
Solution: Replacing AS15-F on T-Con fixed set.




Want more tips? Click here to see all electronics and appliance tips!





By Tech Tips , , , , , , , , 0 Comments Read more...
19 Jan

CE Tech Tips — January 2021

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 57F59A
Reason for Service: Vertical distortion at bottom of picture, or Q777 has failed.
Solution: Install deflection Kit X480315. 

LG TV, 47LG50
Reason for Service: Dead, F101 open.
Solution: Found and replaced shorted mosfet in power supply, Q502.  Replacing this and fuse restored normal operation. 

Mitsubishi TV, VS6071
Reason for Service: No vertical.
Solution: Replacing vertical IC fixed set. LA7838S

Samsung TV, UN60F6350AFXZA
Reason for Service: TV will randomly cycle on and off; gets progressively worse.
Solution: Update firmware, and disconnect Wi-Fi module to see if problem goes away.  If so, replace Wi-Fi module.

Samsung TV, LN46C600F3F
Reason for Service: Set powers up with sound, but no backlight.
Solution: Found open cap in power supply, C818, 0.47uF/450V.  Replacing this fixed set.

Sony TV, KDL-26M4000
Reason for Service: Dead
Solution: Replaced cracked IC902, #670889101, and open R904.  10ohm/half W.

Toshiba TV, 46XV645U
Reason for Service: Dead, no power.
Solution: Replaced open R850 in power supply (1.8ohm/5W) and relay.  23146564X.


Want more tips? Click here to see all electronics and appliance tips!





By Tech Tips , , , , , , , 0 Comments Read more...
05 Oct

CE Tech Tips — October 2020

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Emerson TV, LF501EM4
Reason for Service: Dead set, no standby power light.
Solution: Removed the I/R board and found SM C4056 shorted.  Removing bad cap restored normal operation to the set.

Hitachi TV, 57F59A
Reason for Service: Changes colors, snowy picture, loss of one or more colors, all white and shuts down.
Solution: Replace signal board and make sure the firmware is updated. 

LG TV, 47LM6700
Reason for Service: Dead, 3 blink error.
Solution: Replaced a shorted D607.  MUR460

Panasonic TV, TCP42X5
Reason for Service: Dead
Fix: Replaced U203 on backside of Power board.  FAN6755UWMY.

RCA TV, LED46C45RQ
Reason for Service: Set won’t power up.
Solution: Replacing the EEPROM fixed the set.  U16

Samsung TV, PN64E8000GFXZA
Reason for Service: Dead set, fuse blown.
Solution: Repaired power board by replacing QS802 & QS804.  Examine whole board for bad solder and resolder as necessary.

Vizio TV, E390-A1
Reason for Service: LED backlights will not come on.
Solution: Replacing IC U403 fixed the set.

Zenith, 9-1302 module
Reason for Service: Dead, nothing.
Solution: Resoldered jumper next to Elect Cap CX3452.  Fixed set.

Want more tips? Click here to see all electronics and appliance tips!





By Tech Tips , , , , , , , , , , , 0 Comments Read more...
17 Sep

CE Tech Tips — September 2020

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 60SX2K
Reason for Service: Red convergence no good, can’t adjust.
Fix: Replaced IC-1301 and checked R1303, R1304, R1313, R1314.

LG TV, 32LC70
Reason for Service: Turns on and off intermittently.
Solution: Replacing cable from power supply to the main fixed set. EAD60958303

LG TV, 32LG3DC
Reason for Service: No picture, sounds works intermittently.
Solution: Replacing Q709 fixed set.

Pioneer TV, PRO506PU and Media Receiver, PROR06U
Reason for Service: Shuts down with 12 blink error on media receiver.
Solution: From Pioneer: Replace MR DTB Assy in media receiver.  #-AWE1305

Samsung TV, UN40C5000QF
Reason for Service: Set won’t start, 6 blink error code.
Solution: Replaced audio IC1202 on main board.

Samsung TV, HPS5073X
Reason for Service: If set is cool, takes longer and longer to turn on – as much as 15 minutes.
Solution: Replaced caps in power supply. CS856, CS846

Sylvania TV, LD320SS1
Reason for Service: While watching set, started flashing colored screens, couldn’t stop even by unplugging. When set started up again, had same problem: Test mode.
Solution: With set on, press left arrow then right arrow on the remote to exit.  Some sets you have to press up arrow then down arrow.





By Tech Tips , , , , , 2 Comments Read more...
25 Aug

CE Tech Tips –August 2020

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hisense TV, 48H5
Reason for Service: Dead
Solution: Found couple of shorted diodes on power board, replaced whole power board.

Hitachi TV, 53SDX01B
Reason for Service: HV comes up, then set shuts down
Solution: Pin 1 of ip01 was 0 volts because dp14 was leaky. Replacing fixed set.

Magnavox TV, 47MF437B
Reason for Service: At power on, set chirps but will not start.
Solution: Replaced several bulged caps and Z902 and Z904 were defective.  P6KE120A.  Replacing these fixed the set.

Philips TV, 46PFL3908/F7
Reason for Service: Erratic operation
Solution: Bulletin: Check pin 4 of CN3105 on digital main board for 3.3 V with no keys on function board pressed. If voltage less than 3.3V, unplug keyboard from IR board.  If voltage returns to 3.3V, replace function board. If it does not, unplug CN3105.  If voltage returns to 3.3V, replace IR board. If problem continues, replace digital main board.

Samsung TV, LN40A500T1FXZA
Reason for Service: Power cycles with audible screech sound
Solution: Replaced C102.  47uF/6.3V ceramic, surface mount, blue box.

Toshiba TV, 46XV640U
Reason for Service: No video or OSD, but audio and backlights work
Solution: Found bad SM cap on main board,  C606, 22uF/16V.

Westinghouse TV, EW32S5KW
Reason for Service: Cycling red, green, blue, black. Can’t turn set off.
Solution: Set in test mode.  Press Exit on original remote.




By Tech Tips , , , , , , 0 Comments Read more...