CE Tech Tips — September 2020

CE Tech Tips — September 2020

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 60SX2K
Reason for Service: Red convergence no good, can’t adjust.
Fix: Replaced IC-1301 and checked R1303, R1304, R1313, R1314.

LG TV, 32LC70
Reason for Service: Turns on and off intermittently.
Solution: Replacing cable from power supply to the main fixed set. EAD60958303

LG TV, 32LG3DC
Reason for Service: No picture, sounds works intermittently.
Solution: Replacing Q709 fixed set.

Pioneer TV, PRO506PU and Media Receiver, PROR06U
Reason for Service: Shuts down with 12 blink error on media receiver.
Solution: From Pioneer: Replace MR DTB Assy in media receiver.  #-AWE1305

Samsung TV, UN40C5000QF
Reason for Service: Set won’t start, 6 blink error code.
Solution: Replaced audio IC1202 on main board.

Samsung TV, HPS5073X
Reason for Service: If set is cool, takes longer and longer to turn on – as much as 15 minutes.
Solution: Replaced caps in power supply. CS856, CS846

Sylvania TV, LD320SS1
Reason for Service: While watching set, started flashing colored screens, couldn’t stop even by unplugging. When set started up again, had same problem: Test mode.
Solution: With set on, press left arrow then right arrow on the remote to exit.  Some sets you have to press up arrow then down arrow.





Share this post

Comments (2)

  • Ken Dinckan Reply

    How can we receive the tips

    October 20, 2020 at 2:02 am
    • Kristin Hurst Reply

      Hi Ken, the tips are distributed in our monthly newsletter. If you’re interested in receiving this, we can add your email to the list. Or, they are all posted on our corporate site: solutions.encompass.com under the “News” heading as “Tech Tips.”. Hope this helps!

      October 26, 2020 at 8:33 pm

Leave a Reply

Your email address will not be published. Required fields are marked *