CE Tech Tips — February 2015
technical tips are intended for professional reference only. Please refer to
manufacturer’s recommendations as Encompass does not guarantee the accuracy,
reliability or safety of this information.
TV/DVD Combo
Dead
12uF/100V Non-Polarized cap.
Dead, 10 blink error code
#TXNPA1BJTUE.
Turns off intermittently, cycles
guide your troubleshooting.
Does melody play when set turns off ?
No – means power loss, replace power
supply.
Yes – means the set thinks it shut off
normally. Look at 1 of 2 parts.
the function/IR board. When you hear the relay turn on, quickly remove the AC
cord from the wall. Now disconnect the
function/IR connector from the main board and replug the AC back into the
wall. Does the set stay on ?
of the following: Q601, 604 & 605, C609 & C626, IC601 and Q695
on G1 board.
Red sparkles in the picture
the Y-SUS – C49, 33uF/25V.
PCB, that was produced after Nov. 2011.
Caused by weak resistance in the LITE ON PSU PCB, R929 & R927 should
be upgraded. Models 50PJ and 50PK. Serial numbers, After 011xxxxxxxx (Nov 2010.)
Use part # EBC60660801.
Leave a Reply