Tag - sanyo tv repair

CE Tech Tips — January 2022

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 60V500A
Reason for Service: Sound distortion (rattling sound) on speaker with action movie and bass set to max.
Solution: Replace side protector between woofer and power supply with new part MN06392. 

Samsung TV, LN46A530P1F
Reason for Service: No backlight, power supply comes up with all voltages.
Solution: Replaced main board to fix.

Samsung TV, UN55C6900VFXZA
Reason for Service: Dead set.
Solution: Replaced 2 components in power supply. ICB801 and ZDB802.

Samsung TV, UN40F6300
Reason for Service: Dead set, power LED 2 blink error.
Solution: Found bad SM cap, RS802, replacing fixed set.

Sanyo TV, DP42841
Reason for Service: Audio cuts out at high volume and crackles sometimes.
Solution: Replaced Audio IC LV4906.  

Zenith TV, P42W46X
Reason for Service: Black screen, slowly gets better the longer set is on.
Solution: Found C61 in power supply bad. 47uF/50V.

Zenith TV, Z50PG10UA
Reason for Service: No video or OSD, screen lights up.
Solution: Replacing upper buffer fixed this set.

 

Want more tips? Click here to see all electronics and appliance tips!





CE Tech Tips — December 2021

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 60V500A
Reason for Service: Sound distortion (rattling sound) on speaker with action movie and bass set to max.
Solution: Replace side protector between woofer and power supply with new part MN06392. 

Samsung TV, LN46A530P1F
Reason for Service: No backlight, power supply comes up with all voltages.
Solution: Replaced main board to fix.

Samsung TV, UN55C6900VFXZA
Reason for Service: Dead set.
Solution: Replaced 2 components in power supply. ICB801 and ZDB802.

Samsung TV, UN40F6300
Reason for Service: Dead set, power LED 2 blink error.
Solution: Found bad SM cap, RS802, replacing fixed set.

Sanyo TV, DP42841
Reason for Service: Audio cuts out at high volume and crackles sometimes.
Solution: Replaced Audio IC LV4906.  

Zenith TV, P42W46X
Reason for Service: Black screen, slowly gets better the longer set is on.
Solution: Found C61 in power supply bad. 47uF/50V.

Zenith TV, Z50PG10UA
Reason for Service: No video or OSD, screen lights up.
Solution: Replacing upper buffer fixed this set.

 

Want more tips? Click here to see all electronics and appliance tips!





CE Tech Tips — March 2021

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 60V500A
Reason for Service: Lamp LED blinking.
Solution: Check door lamp switch – boss on door or lamp assembly may not close switch. Apply tape to boss.

LG TV, 60PV250UB
Reason for Service: Set had no video, but audio okay.
Solution: Replaced Z-Sus and resoldered coils on Y-Sus.

Philips TV, 47PFL7403D/F7
Reason for Service: Dead set, no LED.
Solution: Found fuse open, U101 was shorted with black pin hole on top.  Also check for bad 120W resistor that feeds U101.

Samsung TV, PN51F8500AF
Reason for Service: Dead set, main fuse blown.
Solution: Found shorted transistor, QP804C on power board.  Replacing it and fuse fixed set.

Sanyo TV, DP42841
Reason for Service: Dead set, no standby.
Solution: Replaced R606 and IC601. STR-A6051M.

Sony TV, KDL40EX400
Reason for Service: Dead set with no standby.
Solution: Replaced following: IC6101, D6302, D6304 and R6107, 10ohm/1W.

Sony TV, KDL40SL140
Reason for Service: Dead set.
Solution: Set had no standby, fusible resistor R6200 open. 10ohm/half watt.

 

 

Want more tips? Click here to see all electronics and appliance tips!