CE Tech Tips — October 2021wpengine
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.
Reason for Service: Loses video intermittently
Solution: We found a ground wire that was supposed to be screwed to the metal frame, had no screw.
Replacing the screw fixed the set.
LG TV, 50PC5D
Reason for Service: The screen had many red horizontal lines across the top part of it.
Solution: Replacing the upper buffer restored a good picture.
LG TV, 32LC7D
Reason for Service: Left side of the screen it too dark.
Solution: Found two bad caps on the inverter board, C215 and C218, 270uF/10V.
Samsung TV, LN-S2641
Reason for Service: Set won’t start.
Solution: Replacing the main board fixed this set.
Reason for Service: Dead set.
Solution: Found and replaced bad regulator on main Board, IC1001. Check power supply for domed caps also.
Sharp TV, LC-52E77EU
Reason for Service: Set won’t start, power light blinking.
Solution: Replacing main board fixed the set.
Sony TV, KDL55W802A
Reason for Service: Set won’t start, 2 blink error.
Solution: Found and replaced 2 bad transistors in the power supply, Q6502 and Q6503. In addition, R6547 was bad, 0.1ohm/5W.