CE Tech Tips — December 2020

CE Tech Tips — December 2020

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information.

Hitachi TV, 57S710S
Reason for Service: Using HDMI connection,
black picture with no Sync on OCD.
Solution: Clean HDMI jack with 99.8% isopropyl alcohol.

JVC TV, JLC32BC3002
Reason for Service: When set turned on, JVC logo appears,
then sound but no backlights.
Solution: Found shorted D602 on power supply board. MUR460

LG TV, 32LP1DC
Reason for Service: No audio
Solution: Replaced main board.

Samsung TV, PN64D80000FF
Reason for Service: Relay clicks on and off.
Solution: Resoldered TS801s and TC802s on power board.

Samsung TV, LN46C550JIFXZA
Reason for Service:  Set won’t come on, red LED blinks continuously.
Solution: Disconnect LVDS cable; if set comes on with melody, it’s either bad T-con or panel. Reconnect LVDS and unplug cables from T-Con to panel. If set comes on, panel is bad.

Sanyo TV, DP50749
Reason for Service: Power cycles on and off.
Solution: Replaced IC5750 on main board.

Sony TV, KDL46V2500
Reason for Service: Dead set, four red blink error.
Solution: Check all inverter transformers and their associated sm resistors.


Want more tips? Click here to see all electronics and appliance tips!





Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *