CE Tech Tips — May 2019

CE Tech Tips — May 2019

**NOTICE**
Due to the danger and complexity of electronic equipment repair, the following technical tip is intended for professional reference only. Please refer to manufacturer’s recommendations as Encompass does not guarantee the accuracy, reliability or safety of this information. 

Hitachi TV, 60SX2K
Reason for Service: Loss of color
Solution: Replaced X-501 and C508.

Magnavox 32MF30301B
Reason for Service: Power supply fix
Solution: Replace the following: Q600 & 601, D607, 610 & 640,  R608 & F601.

Panasonic TV, H50PE70U
Reason for Service: Set shuts down when trying to turn on.  Shows 12 blink error code.
Solution: Ohm speakers for a short, unplug it if one is found, then try set again.  Replace shorted speaker.

Philips TV, 40PFL3705D/F7 (Serial # beginning with YA1)
Reason for Service: No picture, but has backlight and audio
Solution: F100 on panel controller board was bad.  Replace with 3.15A SMD.  #PNF10148.

Sanyo TV, DP42647
Reason for Service: Set has black screen, but sound okay
Solution: Found shorted diode on T-Con board: CP4, SR34

Sharp TV, LC-52C6400U
Reason for Service: Dead; error, one long, one short.
Solution: Found bad diode on power board: D7805.  MUR460.

Sony TV, KDL-40V4100
Reason for Service: Picture solarized
Solution: Look for bad AS15 chips on T-Con.

Toshiba TV, XV645U
Reason for Service: Dead set; all fuses okay
Solution: Replacing IC Q880 fixed set.  STRY6456.

Vizio TV, L37HDTV10A
Reason for Service: Set locks up when going to tuner setup on digital input.
Solution: Replaced digital tuner board, #3370-0052-0187.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *