CE Tech Tips — January 2015

CE Tech Tips — January 2015

CE Professional Tech Tip Sharing
January 2015
**NOTICE**
Due the danger and complexity of electronics repair, the following shared
technical tips are intended for professional reference only. Please refer to
manufacturer’s recommendations as Encompass does not guarantee the accuracy,
reliability or safety of this information.
Dell Plasma TV, W5001CHD
Reason for Service: 
Dead
Solution:  Replaced 4 Zeners on Y-Mail LJ41-03078A.  ZD5018, 5019, 5021, 5022.  All part # 755-UDZSTE-1733B.
Hitachi TV, 60SDX88b
Reason for Service: No video, audio red LED flashing
Solution: Reseat sub
Deflection  PCB
Ilo TV, LCT32HA36
Reason for Service: Backlight flashes then set goes dead
Solution: Found 3 bad caps
in the power supply, all 1000uF/35V. 
Replaced.
JVC TV, AV36850
Reason for Service: Dead
Solution:  Replaced C926, 1000uF/16V
Philips TV, 
50PFP5332D/37
Reason for Service: 
Dead
Solution:  Replaced 3 caps, C601 and 609, both 470uF/25V and C036,
100uF/50V
RCA TV, ITC222
Reason for Service: No high voltage, power supply chirps 3 times and shuts
down
Solution: Replace flyback.
If drawing number on fly is 107 56 Xxx, use 259296.  If not, use 265409.  Also replaced TI-010, 2SC5588, #259899 and
DI-012,  BYW34V, #244834.
Samsung TV, HP-S7178WX/XAC
Reason for Service: 
Set powers up then shuts down with all 3 LEDs
blinking
Solution: Found a bad cap on
the ballast, 47uF/450V.  Replaced the
ballast.
Sanyo LCD TV, DP26648
Reason for Service: Dead, fuse Ok.
Solution: Replaced Q601 and
Q602. Part # FQPF16N25C
Sony TV, KF-xxWE610
Reason for service: Shutdown with 6 blinks.
Solution: Replaced MCZ3001DB
on G1 board.
Sony TV, LA3
Reason for Service: 
Dead set with 6 blinks.
Solution:  Replaced IC1607 on the G board, check thermal fuse on
optical block also. Brightness  is
changing every second or so.
Solution: Check power supply
for bad caps.  1000uF/16V.
Toshiba TV, 
42LX196
Reason for Service: 
Dead set, blinks 3 times.
Solution: Problem not the
Seine board, but the power regulator IC Q820 on the power supply board was bad.
SRX2039, #23135094

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *